VIEW

Wall Putty

Sarvottam Wall Putty is a premium white cement-based powder enriched with flexible polymers, designed to fill surface imperfections and create a smooth, rich wall finish. Its strong binding properties help reduce plaster porosity and provide a uniform base for painting. Easy to mix and apply, it is an excellent choice for wall preparation and finishing projects. Available in a 40 Kg pack.

Pack Sizes

40 Kg

7YearsWARRANTY

7 Years Product Warranty

Backed by Sarvottam Paints quality guarantee.

Key Features

Smooth Finish: Creates even wall surfaces.
White Cement-Based: Strong cement formulation.
Flexible Polymers: Enhanced binding properties.
Pore Filling: Helps reduce surface porosity.
Strong Adhesion: Bonds firmly with plaster.
Imperfection Filling: Smooths minor surface defects.
Easy Application: Convenient putty blade application.
Paint-Ready Base: Prepares walls for finishing coats.
Pack Size: 40 Kg.

Wall Putty – Smooth Walls, Strong Foundation, Beautiful Finish

Sarvottam Wall Putty is a premium-quality, white cement-based wall finishing powder enriched with flexible polymers. Specially formulated to correct surface imperfections and create a smooth, rich finish, it provides an excellent foundation for beautiful and long-lasting wall painting.

Its advanced formulation penetrates plaster pores and forms a strong bond with the surface, helping reduce porosity and create a more uniform base for subsequent paint applications. By filling minor cracks, uneven areas, and surface imperfections, Sarvottam Wall Putty helps achieve a refined, professional-looking wall finish.

Designed for convenient application, it can be mixed with water to form a smooth paste and applied using a putty blade. With proper surface preparation, controlled application thickness, and adequate drying, it creates a consistent surface ready for further finishing.

Whether you are preparing newly plastered walls or renovating existing surfaces, Sarvottam Wall Putty offers a practical solution for achieving smooth, even walls.

Recommended Applications

Interior cement-plastered walls
New construction projects
Wall surface preparation
Residential and commercial buildings
Minor surface imperfection repairs
Wall renovation and repainting projects

Sarvottam Wall Putty – The Perfect Foundation for Beautiful Walls.

Wall Putty – Smooth Walls, Strong Foundation, Beautiful Finish

Whether you are preparing newly plastered walls or renovating existing surfaces, Sarvottam Wall Putty offers a practical solution for achieving smooth, even walls.

Recommended Applications

Interior cement-plastered walls
New construction projects
Wall surface preparation
Residential and commercial buildings
Minor surface imperfection repairs
Wall renovation and repainting projects

Sarvottam Wall Putty – The Perfect Foundation for Beautiful Walls.

Product Name	Sarvottam Wall Putty
Brand	Sarvottam Paints
Product Type	White cement-based wall putty
Form	Powder
Base	White cement
Polymer Content	Flexible polymers
Finish	Smooth and rich
Function	Fills surface imperfections
Porosity	Helps reduce plaster porosity
Mixing Water	45% water by volume
Working Time	Use mixed paste within 3 hours
Application Tool	Putty blade
Recommended Coats	2 coats
Between Coats	3 hours
Maximum Total Thickness	Less than 1.5 mm
Sanding Grade	Minimum 400-grade fine emery sheet
Before Topcoat	Wait 3 days
Pack Size	40 Kg

Application Instructions

For a smooth, uniform wall finish, follow these recommended application steps.

Step 1: Surface Preparation

Inspect the wall for loose plaster, flakes, chalky particles, dust, and other contaminants. Ensure the surface is sound and suitable for putty application.

Step 2: Clean the Wall

Remove loose flakes and chalky materials using sandpaper or a wire brush. Wash the wall thoroughly with clean water to remove remaining dust and impurities.

Step 3: Prepare the Putty Mixture

Mix 45% clean water by volume with Sarvottam Wall Putty to prepare a smooth, workable paste. Stir thoroughly until the mixture achieves a uniform consistency without lumps.

Use the prepared mixture within 3 hours of mixing.

Step 4: Moisten the Surface

Before applying the putty, moisten the cleaned wall surface with clean water as recommended. Avoid leaving excess standing water on the wall.

Step 5: Apply the First Coat

Using a suitable putty blade, apply the first coat of Sarvottam Wall Putty evenly, working from bottom to top.

Maintain a thin, consistent layer across the surface.

Step 6: Smooth the Surface

Smooth the applied putty using a wet cloth or a fine emery sheet of minimum 400-grade, as required, to remove surface irregularities.

Step 7: Apply the Second Coat

Wait approximately 3 hours after the first coat before applying the second coat.

Moisten the surface again and apply the second coat using the same bottom-to-top technique.

Keep the total thickness of both coats below 1.5 mm.

Step 8: Final Surface Finishing

Smooth the finished surface as needed using a fine emery sheet or wet cloth. Remove any remaining dust and surface impurities to achieve a clean, uniform finish.

Step 9: Allow Proper Drying

Allow the finished putty surface to dry and settle for 3 days before applying the topcoat. Follow the recommended paint system instructions for subsequent primer or paint application.

Important Application Tips

Remove loose flakes and chalky material before application.
Clean the wall thoroughly with water.
Use the recommended 45% water mixing proportion.
Prepare a smooth, lump-free paste.
Use the mixed putty within 3 hours.
Moisten the wall before each coat.
Apply putty from bottom to top.
Use minimum 400-grade emery paper for smoothing.
Maintain a 3-hour interval between coats.
Keep the total putty thickness below 1.5 mm.
Clean the surface after final smoothing.
Wait 3 days before applying the topcoat.

It is a white cement-based powder enriched with flexible polymers that helps smooth wall imperfections and reduce plaster porosity.

It is available in a 40 Kg pack.

"Mix approximately 45% water by volume with the putty to form a smooth paste, following the product instructions."

Use the prepared putty paste within 3 hours of mixing.

Apply two coats, keeping the combined thickness below 1.5 mm.

Wait approximately 3 hours after the first coat before applying the second coat.

Yes. Moisten the prepared wall before applying each coat.

Remove loose flakes and chalky material with sandpaper or a wire brush, then wash the wall with water.

Apply with a putty blade from bottom to top and smooth the surface with a wet cloth or fine emery sheet.

Use a fine emery sheet of at least 400 grade where smoothing is required.

Wait 3 days after putty application before applying the top coat, subject to suitable drying conditions.

Keep the total thickness of both coats below 1.5 mm.

Back to Products